Shop
Description
Price: $20.99
(as of Jan 05, 2025 02:41:39 UTC – Details)
Product Description
WEP 960-V Plastic Welder comes with 200 pcs hot staples in 4 different shapes to help you repair different kinds of cracks, splits, and damages in plastic.
Weld
1.Fit the right staple
2.Weld the cracks
Trim
1.Secure the crack
2.Snap the excess staple (push back-and-forth)
Polish
1.Remove sharp edges
2.Repaint plastic
LED Light
Points directly to your area of work, and provides consistent lighting. Unlike the traditional one with flashing LED lights that may cause eye discomfort.
Quality Power Cord
Our plastic welder uses quality US specification (UL certified) power cord, the length of the cord is 137 cm/ 53.9 inches for easy use.
Built for Repair
You can use our hot stapler tool in many different applications including car bumpers, gas tanks, electronics’ casing, and many other items made with soft ABS plastic.
Specifications
Model number WEP 960-V Rated voltage range 110V-127V/AC, 60Hz Main unit dimensions L6.41*W5.75*H1.57in ±0.2in Operating ambient temperature 0~40°C/32°F~104°F
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
—
5.0 out of 5 stars
1
4.4 out of 5 stars
91
4.7 out of 5 stars
197
4.5 out of 5 stars
31
4.6 out of 5 stars
28
Price
$11.99$11.99 $11.99$11.99 $24.29$24.29 $20.99$20.99 $23.99$23.99 $22.99$22.99
Category
Plastic Welder Hot Staples Set Plastic Welder Hot Staples Set Plastic Welder Plastic Welder Plastic Welder Plastic Welder
Functions
Compatible with WEP 960-V Compatible with WEP 960-V Plastic welding Plastic welding Plastic welding Plastic welding
LED Light
✓
✓
✓
Operation Indicator
✓
Overheat Protection Function
✓
✓
✓
Applications
Car bumpers, Gas tanks, Kayaks, Electronics’ casing, and many other items made with soft ABS plastic Car bumpers, Gas tanks, Kayaks, Electronics’ casing, and many other items made with soft ABS plastic Car bumpers, Gas tanks, Kayaks, car dashboard and sporting gears and many items made with thick plastic Car bumpers, Gas tanks, Kayaks, Electronics’ casing, and many other items made with soft ABS plastic
Great Repair Tool: WEP 960-V blue plastic welder is great for repairing cracks in ABS plastics such as car bumper, plastic gas tank, car dashboard and more. The hot staples gets heated rapidly when you press the activation button, and you can embed the staples into plastic cracks to join the two broken pieces. Once done joining, pull to separate, and cut away the excess staple. Plastic welding is easy as that!
Plastic welding kit: Our plastic welding tools kit include a pair of cutters, 200 pcs of hot staples (50 each for outer corner cracks, inner corner cracks, small/straight cracks, large/curved cracks.) and a 110V WEP 960-V plastic welder. Our hot stapler plastic repair kit is suitable for a wide range of environments with built-in LED light. The light provides consistent lighting directly on the plastic weld point for low-light environment, this tool is a perfect addition to your tools kit.
Time saver: Sending plastic parts for repair or replacement is time-consuming and expensive, why not pick up a tool to perform a simple repair! This tool is suitable as automotive tools for mechanics for motorcycles, car bumpers, plastic parts, or normal household plastic parts.
Safety Function: This plastic stapler comes with protection functions to prevent potential overheating, and protects the user. At the same time, our plastic welder uses quality US specification power cord (length: 53.9inches/137cm). NOTE: Plastic welding generates fumes, please wear appropriate mask for protection purposes.
This Plastic Welder Kit is covered by our exclusive 1-year USA technical support, with 24-hour assistance from our dedicated team. Note: This product is rated for 110-127V USA specifications. Do not connect this iron to a 220V power socket.
Brad CralleJanuary 5, 2025
Works the way itâs supposed to.
Perfect
rafaelbelmonteJanuary 5, 2025
A good tool
Is so good
Amazon CustomerJanuary 5, 2025
Plastic golder
This works well to put two plastic part back together.
Jane FairchildJanuary 5, 2025
There’s a learning curve but once you get the hang of it you can get some impressive results
Take your time to figure out how to really work this and you’ll be impressed. You can really mend a wide range of plastics with this. If you take your time with it you can achieve an almost seamless result with your repairs. Works great for repairing motorcycle fairings
I. C. SPOTZJanuary 5, 2025
Better than expected
For the price it worked better than expected. Functions well, relatively heavy weight for the size indicates good heavy duty components in a device like this. Heats the welding wires within about 5-6 seconds but other higher wattage models would heat even quicker which would be a plus if mending long cracks and installing many staples. I mended some cracked plastic household items with it and will get a few more years of service from other wise trash bound plastic goods. Putting the staples in the gun is a bit finicky but I imagine all similar plastic welders have the same issue, it seem to work best for me if I slightly inserted one wire of the staple then bent the other side into alignment and pushed both sides evenly with a little pressure….I would suggest that while inserting the staple you do so over a table top and not over the floor or ground because if you drop the staple to the ground it will be hard to find and may end up being stepped on and risking a foot puncture Note: the staples Are Not Magnetic so you can’t sweep for them with magnetic pick-up tool. The side cutter style pliers give a flush cut to wire ends But the metal is too soft on the blades and after a few cuts the edge was damaged beyond use and I threw it away, You’ll need to get a side cutter made for hard steel. After pressing the hot staple in the plastic and releasing the trigger it only takes a couple of seconds for the molten plastic to cool enough to pull the gun back and it releases the staple quite easily with no resistance. I had a softball size hailstone crack in a patio chair that I repaired from the bottom side so you couldn’t see the unsightly repair but the chair was molded in such a way that some parts were thinner than others and a few of the staples over penetrated and could be seen on the top chair seat but overall it made a good strong repair and saved me $40 dollars instead of buying a new chair.
ForrestJanuary 5, 2025
Nice Stitch kit for plastic
I seem to be doing plastic repairs more often than not now days. This Stitch kit works really well in a bit better than I expected. Kind of reminds me of soldering but for plastic. Metal stitches go in fairly easy and then can be covered with a body filler if you would like.
JoshJanuary 5, 2025
This brought my headphones back to life!
I love my old headphones, but they snapped at the swivel and I haven’t been able to use them for a while. I was able to use this plastic welder and the included metal “”staples”” to do a decent enough repair. That being the sole reason I bought these, they’ve already earned all 5 stars. The repair would have been $100 plus shipping, so for cost of this kit ($20) it was worth every penny.The device heats the staples red hot within seconds, but is cool enough to handle in less than a minute if you’re going slowly. Still would suggest using gloves to avoid accidently burning yourself.I noticed that the staple has to be in place for any power to flow, including the lights. So the lights coming on is a good indication that the staple has good conductivity.The most dangerous part is trimming the staples. The bit you cut off will go flying if you don’t also hold it with pliers, so safety glasses are also important.The edge trimmers that are included survived long enough to finish this repair, so I am happy. But the staples are actually a bit harder than the blade on the trimmers, so they did get a little mangled. I don’t expect them to last very long. But I still have more than enough staples left for another repair job and after seeing what this can do, I have ideas. This might actually be a good method for strengthening 3D prints.
RicoJanuary 5, 2025
Great For Repairs On Thicker Plastics
This is a good set for repairs on thicker plastics. I used it on a laundry basket with broken handles and it worked well as long as I was careful about ensuring the staples stayed seated in the middle of the plastic and didnât pull them out before they had cooled enough to harden fully. In thinner plastics this will be tough to use and it would be nice if the set included some heads that you can use to just melt plastics together like Iâve seen elsewhere. But thatâs a minor issue and for moderate to thick plastic repairs this set works really well.