Shop
Description
Price: $189.00 - $166.95
(as of Dec 11, 2024 07:40:30 UTC – Details)
From the brand
When our founder used a soldering station to repair products, he felt that the station did not heat up fast enough and often wasted most of the time waiting for the temperature to rise. In addition, soldering stations with fast heating speeds were expensive, so we created SUGON, a high-end soldering station and rework station with fast heating speeds but a medium expensive.
What should I know about this company?
Our company was established in 2004 and has grown into two factories with an actual production area of 8000 square meters.
We mainly produce high-end soldering stations and hot air rework stations that are available in the market today.
What makes our products unique?
The original intention of the design is to take heating speed, service life, customer experience and various functions as the core of the product
How fast does the product heat up?
If you think 20 seconds to heat up to 716℉ is fast, try SUGON soldering station, it only takes 3 seconds
SUGON Hot air rework station
New soldering station
SUGON Soldering station
【Fast heating】Soldering iron station is 120W power, heats up quickly from standby temperature to 716°F working temperature in 2 seconds, digital soldering iron station kit with PID temperature control, control the temperature and rise steadily. As shown in the video.
【Wide voltage universal for 110V and 220V】The new generation of digital soldering iron station has adjusted the voltage, soldering iron can be universal 110V and 220V two different voltage.
【Precise one-piece soldering iron tips】 The soldering iron station kit uses a 210 type handle and 3 different types of all-in-one heating element soldering iron tips for improved heating speed and easy replacement compared to having separate heating elements and tips. the I type, IS type and K type tip models can meet your different work needs. the 210 type tip is more accurate compared to the 245 type tip for more precise soldering work.
【Quick change soldering iron head bracket】You can quickly change the high temperature soldering iron tip during work without using pliers or other auxiliary tools.
【Temperature range】Soldering station kit that conforms to human body design can adjust the temperature range (100℃-450℃, 212℉-932℉), ℃/℉. With 3 preset channels, you can set different temperatures to meet your work need.
【Automatic Hibernation】 The handle enters the hibernation bracket for quick hibernation to extend the service life of the heating core, pick up the handle to instantly heat up to the set temperature.
【After-sales service】This soldering station enjoys a 12-month quality warranty service. Soldering iron head, high temperature cleaning sponge, copper wire cleaning ball and other consumables are not covered by the warranty. If you have any questions about this product, please feel free to consult us, we will reply you as soon as we receive your message.
【2 different cleaning tools】 High temperature cleaning sponge and cleaning copper wire, fast and effective.
【4 sets of adjustable standby temperature】（0,302,356,392）℉（0,150,180,200）℃ to meet different needs at work.
【What you get when you buy A9 210 soldering station】1 *SUGON A9 210 Soldering Stations，3 * C210 Precision one-piece soldering iron tips，1 * Handle，1 * Copper wire cleaning ball，1 * High temperature cleaning sponge，1 * Power cord，1 * Power cord retaining rod，1 * Instruction manual，1 * Warranty card (12 Months).
Customers say
Customers like the functionality, heat transfer, and value of the soldering station. They mention it works well for fine soldering, heats up quickly, and is adequate for low temperatures. Some say the build quality is very good and feels like commercial grade. However, some customers have reported that the instructions are bad and unclear.
AI-generated from the text of customer reviews
Muhammad M.December 11, 2024
Good product
I love this soldering iron. Ive used the JBC soldering iron before and this is a clone of it. Ill say that this is basically as good as that. Build quality is very good and temperature control seems accurate. Ill be purchasing official JBC tips in the future, though the ones it comes with work fine.
Dan M.December 11, 2024
Recommended!
I was shopping for a cheap but not too cheap of a solution for a soldering station and didn’t want to spend $500+. Luckly, the Mobile Repair discord server recommended me this company and model. It does the job pretty well as far as I can see when using it. I just wish it came with additional sponges but I can just buy some from a store and cut them into squares.
tehsquirrelDecember 11, 2024
Amazing value, like an $800 soldering station
Having the right tools is so important and this station makes soldering easy. The sleep feature works perfect and I’ve never had better solder joints. You get instant diffusion of solder into 10ga stranded ofc. Filling the solder wells of connectors is just as easy which makes getting the right connection smooth. The whole well becomes liquid, and the tinned wire smoothly sets in. The fit and finish is top notch. I hope it is easy to find replacement tips when the time comes, but it does do a nice job of saving the tip.
Shawn LaughlinDecember 11, 2024
Heats up fast which is a good thing
This is the first soldering station Iâve owned and am very impressed with it. The iron is so small and I thought there is no was this is going to do as well as my large iron. I was wrong. It worked great. No waiting for it to heat up. Itâs even got a load meter so when you touch the hot end to what you are soldering the load meter will be high and will drop as it heats it up. Thatâs how I know itâs ready to apply solder,when tge number reaches 10 percent or so from 100.Works great for what I needed it for, leds and circuit boards and comes witg 3 differebt style tips for pin point heating or flat tip for larger area.Would buy again.
EthanDecember 11, 2024
A9 Series above all
I’ve used a ton of JBC clone stations as well as original JBC stations these past few years, and have come to really prefer any of the A9 stations over others. Having the versatility to switch between 115/210/245 is far too valuable, especially at this price point.
Amazon CustomerDecember 11, 2024
This Solder Station Is Almost O.K.
This Solder Station Is Almost O.K.This Sugon A9 245 Solder Station is adequate for low temperatures and for higher temperatures if you do work a-roundsâ. However, there are several negatives. The first is that there is very little instruction supplied with the unit. When my unit stopped working correctly, I contacted them for help under warrantee. They answered using (obviously inadequate) translation software. Three times they ignored, and never answered the question, âWhat caused this problem and how do I avoid it from happening again?âWhen I tested the tip temperature with a thermocouple thermometer it showed that the station needs to have increasing temperature compensation as the tip temperature is increased. This presents a problem because you cannot have more than one temperature compensation setting and there are three different channels. I was using a large tip and had to set the compensation for channel #1 at about 50 degrees higher to achieve an accurate 410â° F. The higher the temperature you need at the tip, the higher the Sugon needs to be set. The 50 degree compensation setting was not high enough for the higher temperatures I wanted for channel 2 and 3. I did a go-around by monitoring the tip temperature with my thermocouple as I raised the Sugon station temperature until I got the needed temperature at the soldering tip, and then saved it to the next channel. This seems to work, but most people do not have thermocouples, and it makes it difficult to know what the actual tip temperature is. Even with compensation, the temperature at the tip on channel 2 needed to read about 50â° F. more on the Sugon Station than the tip read, and the highest temperature needed an increase of about 90â° F. This means that the Sugon will work at higher temperatures, but it will not be displaying the actual tip temperature; and can be confusing.Several weeks into use, all three of the channel buttons, and the up and down temperature buttons, and the set button, showed an err message beside the temperature. There are no troubleshooting instructions, and no explanation of the err message. The temperature was locked into its last setting and was the same on every button and channel. Still new enough to be covered by the one year warrantee, I contacted the company. Communicating with them was a frustrating experience. Each contact had a one day wait for a reply. Instead of taking me at my word of what the problem was, they had me send them photos of the problem. After sending 6 different photos, their next day reply was to send me two inoperable .peg files. I requested that they resend as .jpegs and the next day I got two inoperable .jpeg files. Frustrated, I then requested that they include the photos within their message and/or tell me how to fix it. The next day the reply did not include the pictures, but said I should hold down the channel one button and then turn the unit on. This cleared all of the err messages and the unit worked again. When I replied that this worked, I asked them why this situation happened and how to avoid the error, they ignored the question. They obviously knew what the problem was from my description. I asked them why did they waste so much of my time in days; having me send photos, and not suggest this process right away? Their only response was, âDue to the use of translation software for communication, there may be some errors that may cause you to make operational mistakes or not understand the steps. Therefore, we prioritize providing pictures or videos for you to view.âFurther requests for an explanation of their codes and how to avoid the problem got this response, âHello customer, the bottom of our soldering station comes with the instructions.âThe instructions they refer to are lightly printed on the plastic base and are almost the same color as the plastic, and all but a few words are illegible. I photographed the bottom numerous times using a tripod, long exposure, and also with/without a flash. Most photographs showed nothing. This is the best shot and was accomplished using a tripod without a flash. Only the bottom square is in English and mostly unreadable.Originally, I gave this product 3 stars in the hope of giving a balanced review. However, after receiving their last reply I give it a 1!
MarvinDecember 11, 2024
Works great
Heats up quick, recovers quick, can use original JBC tips.Tried using with some cheaper tips from Amazon and Aliexpress but they don’t work as good as original JBC tips, even when new.Buy a cheap station like this one and original tips, which are around 30ish dollars each, you won’t be disappointed.
BobDecember 11, 2024
Amazing value.
I’ve been looking at soldering stations to replace my aging Weller for quite some time. Based on cost and positive reviews I picked up a Sugon A9, and I couldn’t be happier. My first job was to rebuild my truck’s instrument cluster and it was perfect for that. I’ve tackled several jobs since and it’s worked perfectly for each. I picked up a 210 handle originally, which was great for what I needed but I’ll be getting a 245 handle/tips in the near future.
rawad berroDecember 11, 2024
the product gave erro HA