Shop
Description
Price: $65.48
(as of Dec 22, 2024 22:52:52 UTC – Details)
🟢1. SOLDERING BOARD JP# 1922-4055 Made in USA
🔸Dimensions: 5″ x 5″ x 1/2″ Thick (120mm x120mm x 12.7mm)
🔸Temperature Tolerance: Up to 2000ºF / 950ºC.
🟢2. SOLDERING PICK TITANIUM JP# 1919-950
🔸Overall Length: 6-1/2″ – 165mm
🔸Pick Length: 2″ – 53mm
🟢3. THIRD-HAND BASE JP# 1418-101
🔸Base Material: Cast Iron
🔸Base Weight: 12.2oz
🟢4. FIBER GRIP TWEEZERS JP# 1419-5018
🔸Overall length: 6-1/2”
🔸Tweezer Tip: Bent 45o – Serrated.
🟢5. CROSS LOCK TWEEZER JP# 1419-5001
🔸Overall length: 4-3/4”
🔸Tweezer Tip: Pointed – Serrated
WIRE Solders Diameters 20ga – 0.032″ – 0.81mm / Lengths: 12″ JP# 1925-45331 Made in USA
🟢6. SOFT/EASY SPECIFICATIONS:
🔸Solder: Silver Content of 65%
🔸Melt temperature: 1,240°F – 671°C
🔸Flow temperature: 1,325°F – 718°C
🟢7. MEDIUM SPECIFICATIONS:
🔸Solder: Silver Content of 70%
🔸Melt temperature: 1,275°F – 691°C
🔸Flow temperature: 1,360°F – 738°C
🟢8. HARD SPECIFICATIONS:
🔸Solder: Silver Content of 75%
🔸Melt temperature: 1,365°F – 741°C
🔸Flow temperature: 1,450°F – 788°C
SHEET Solders Measure: 1″ x 1″ Square – Weight 1Dwt – 1.5Gr JP# 1925-45223 Made in USA
🟢9. SOFT/EASY SPECIFICATIONS:
🔸Solder: Silver Content of 65%
🔸Melt temperature: 1260o F – 682oC
🔸Flow temperature: 1,325°F – 718°C
🟢10. MEDIUM SPECIFICATIONS:
🔸Solder: Silver Content of 70%
🔸Melt temperature: 1,295°F – 746°C
🔸Flow temperature: 1,360°F – 738°C
🟢11. HARD SPECIFICATIONS:
🔸Solder: Silver Content of 75%
🔸Melt temperature: 1,375°F – 746°C
🔸Flow temperature: 1,450°F – 788°C
🟢12. HANDY FLUX – Paste Made by Lucas Milhaupt 7oz. JETS Product # 1924-407 Made in USA
🟢 12 PCS Soldering kit
🟢 Most of the items are made in USA
🟢 JETS INC #1020-400712 By JTS
🔻More information on Product Description🔻
Rose PaulsenDecember 22, 2024
Good starting point
Good starting point, you will still need a few more things to go with it, it’s not a bad way to start of
Destiny H.December 22, 2024
Not melting
Solder doesn’t melt. I’ve tried with and without flux and it won’t melt even with sitting on it for 5 min on a hot flame
NC6565December 22, 2024
Quality not what I expected.
The third hand piece I received does not work. The screw threads are damaged and it won’t tighten to hold the tools. Also, only one of the tweezers will fit in the narrow third hand making having two different tweezers pointless as I can only kind of use one of them. When I put the smaller tweezers in the third hand base, it holds it in such a way that makes the tweezers open wider towards the middle and come to a point at the tips, so they will not hold my jewelry in place. The third hand also won’t tighten below the part that holds the tweezers, so even when I managed to get the tweezers to stay in the space with the defective screw, the bottom ball won’t tighten enough and continued to allow the tweezers to move all over the place. Because of this issue, the ring I was working on and had just heated up fell out of the tweezers and right onto my leg burning two holes through a brand new pair of pants. The Flux I received seemed used and the brush attached to the lid is a spread out mess that keeps having pieces fall out of it making it really hard to use. The Flux leaks and didn’t have a seal on it. It also looked almost half gone making me think I received a used product. The metal soldering pick that came with the kit has a cancer warning sticker on the package that it came in and this information was not put in the product description, so I haven’t even taken that one out of the package because I donât know what its made out of or which part of it unsafe. Pretty much the only things I can use from the kit is the solder wire and the ceramic plate which is why I gave it 2 stars.