Shop
Description
Price: $11.99
(as of Dec 01, 2024 02:54:27 UTC – Details)
60/40 Rosin Core Solder Wire, 0.6mm and 1.5mm Tin Lead Rosin Core Solder for Stained Glass, Electronics, Gauge wires, Jewelry, Electric Toys and Models,(0.6mm and 1.5mm/ 50g)
Tin Lead Rosin Core Solder：rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices，gauge wires, toys, stained glass, jewelry and more; NOT for plumbing
Solder Wire Composition：60% Tin and 40% lead. Melting point 190°C / 374°F, quick and easy，Rosin core with 2% flux, no extra flux is needed
Good quality soldering wire: flows well and heats evenly, easy to use. Good solder ability both in electrical conductivity and thermal conductivity; With the solder wire reel, soldering can be accomplished quickly.
Pack Content: 50g( 0.11lbs) 0.6mm X1 and 50g( 0.11lbs) 1.5mm X1, perfect as a starter kit for beginners
Rosin Core Solder Wire:We have a professional team and provide high 60/40 rosin core solder wire. (WARNING: This product can expose you to lead, which is known to the California to cause brith defects or other reproductive harm.For more information go to the offical Proposition 65 Warnings Website: www.P65Warnings.ca.gov )
Customers say
Customers like the value for money, quality of the solder, and ease of use of the product. They mention it works well for soldering electronics, is a good buy for the money, and is great for beginners. Some appreciate the quality. However, some customers disagree on the size.
AI-generated from the text of customer reviews
){kind=link}
Captain Paulie BorowskiDecember 1, 2024
Great stuff
Works great
JonDecember 1, 2024
Excellent!
Although I haven’t used the smaller roll yet, the larger one, is outstanding! Just what the doctor ordered! It’s been difficult to find 60/40 non-lead-free rosin core solder most anywhere since Radio Snack shut down. These little spools have a good amount on them, are small and are really handy to pack into a service kit. Good price too.
Amazon CustomerDecember 1, 2024
Perfect for RC
Just received this today and went to the bench for a test. Solders nicely and is strong. I bought this for my RC hobby. Works perfect for connectors. At 700 degrees it melts and flows perfectly for XT60, Deans and bullet connectors. Highly recommend. Will purchase again.
ArgyleDecember 1, 2024
This is the perfect diameter for Capacitor replacement and other hobby work
This is the perfect diameter for Capacitor replacement and other hobby work. As I have only ever used 60/40 solder I bought this in hopes its melting point was a bit lower then 60/40. Its not. That is on me for not understanding that 63/37 is actually a tad higher Tin content instead of lead. But its good solder. And cannot fault it for my ignorance.
Daniel MooseDecember 1, 2024
Satisfied With Purchase … Would Recommend …
Itâs nice to have 2 sizes of solder to work with, but they didnât put much on the spools. I already used some of the smaller size while I was replacing wire terminals in a battery charger, and it works well … itâs easy to use, and it made a nice, tight connection.
Lab MomDecember 1, 2024
Hard to clean when using for stained glass
Although having the rosin core is convenient to use, I found it hard to clean the rosin off of my stained glass work. I used the “flux” cleaner I normally use when I separately use flux then solder pieces. I literally had to scrap the rosin off with an exacto knife to remove it from my piece. Perhaps there is an easier way to clean the rosin off that I dont know about. This is the only reason I rate this low is the difficulty cleaning the rosin.
techman44December 1, 2024
nice item
no complaints
Jon1809December 1, 2024
nice starter kit for amateurs and beginners.
Prompt shipping, excellent/secure packaging/Good quality product. Two pack of different size depending on my needs. rosin core were used for electronics and gauge wires were for toys and tools. It’s not for copper pipes in plumbing, Perfect as described by the seller. Price is very competitive. Canât ask for anything more 🙂 It’s a nice starter kit for amateurs and beginners.
.duckyDecember 1, 2024
Having 0.6mm and 1mm allows for way more control and variable application. Solder works perfectly and all bonds have been solid with no issues. Highly recommend.