Shop
Description
Price: $29.99 - $23.99
(as of Jan 04, 2025 15:43:50 UTC – Details)
Product Description
The WEP 960-V plastic welder now comes in an 85W configuration! Built specifically for welding THICK PLASTICS are found on car bumpers.
Heavy-Duty Performance
At times, replacing the entire bumper is more expensive than a simple fix. You can trust our 85W welding staples to penetrate thick bumpers with ease.
LED Light
Points directly to your area of work, and provides consistent lighting. Unlike the traditional one with flashing LED lights that may cause eye discomfort.
Super Fast Heating
Efficiency is the top priority in professional repair, the staples take as little as 2 seconds to heat to glowing red.
Large Wave
Fixes short cracks, and joint gaps in plastics.
Flat Wave
Great for joining long cracks.
Corner Staple (Inner)
Great for 90°tabs, and posts.
Corner Staple (Outer)
Great for 90°tabs, and posts.
Large Wave
Flat Wave
Corner Staple (Inner)
Corner Staple (Outer)
Model number 960-V85 Rated voltage range 110V-127V/AC, 60Hz Main unit dimensions L7.09*W6.69*H1.97in ±0.2in Operating ambient temperature 0~40°C/32°F~104°F Display LED Rated Power 85W
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
—
5.0 out of 5 stars
1
4.4 out of 5 stars
91
4.7 out of 5 stars
197
4.5 out of 5 stars
31
4.6 out of 5 stars
28
Price
$11.99$11.99 $11.99$11.99 $24.29$24.29 $20.99$20.99 $23.99$23.99 $22.99$22.99
Category
Plastic Welder Hot Staples Set Plastic Welder Hot Staples Set Plastic Welder Plastic Welder Plastic Welder Plastic Welder
Functions
Compatible with WEP 960-V, WEP 960-V85 Compatible with WEP 960-V, WEP 960-V85 Plastic welding Plastic welding Plastic welding Plastic welding
LED Light
✓
✓
✓
Operation Indicator
✓
Overheat Protection Function
✓
✓
✓
✓
Applications
Car bumpers, Gas tanks, Kayaks, Electronics’ casing, and many other items made with soft ABS plastic Car bumpers, Gas tanks, Kayaks, Electronics’ casing, and many other items made with soft ABS plastic Car bumpers, Gas tanks, Kayaks, car dashboard and sporting gears and many items made with thick plastic Car bumpers, Gas tanks, Kayaks, Electronics’ casing, and many other items made with soft ABS plastic
Great Plastic Repair Tool: WEP 960-V85 high power plastic welder is great for repairing cracks in very thick plastics such as car bumper, plastic gas tank, car dashboard and sporting gears and more. The hot staples gets heated rapidly when you press the activation button, and you can embed the staples into plastic cracks to join the two broken pieces. Once done joining, pull to separate, and cut away the excess staple. Plastic welding is easy as that!
Plastic Welding Kit: Our plastic welding tools kit include a pair of cutters, 200 pcs of hot staples (50 each for outer corner cracks, inner corner cracks, small/straight cracks, large/curved cracks.) and a 110V WEP 960-V85 plastic welder. Our hot stapler plastic repair kit is suitable for a wide range of environments with built-in LED light. The light provide consistent lighting directly on the plastic weld point for low-light environment, this tool is a perfect addition to your tools kit.
Time saver: Sending plastic parts for repair or replacement is time-consuming and expensive, why not pick up a tool to perform a simple repair! This tool is suitable as automotive tools for mechanics for motorcycles, car bumpers.
Safety Function: This plastic stapler comes with protection functions to prevent potential overheating, and protects the user. At the same time, our plastic welder uses quality US specification power cord (length: 53.9 inches/ 136.9cm). NOTE: Plastic welding generates fumes, please wear appropriate mask for protection purposes.
This Plastic Weld Kit is covered by our exclusive 1-year USA technical support, with 24-hour assistance from our dedicated team. Note: This product is rated for 110-127V USA specifications. Do not connect this iron to a 220V power socket.
Amazon CustomerJanuary 4, 2025
very good
Good service
Amazon CustomerJanuary 4, 2025
Good product
Easy to use where product
Trevor F.January 4, 2025
Works great for quick repairs of plastic parts
This plastic welder works great for quick repairs of plastic parts. It’s really easy to use. It can heat the hot staples to glowing red in just a few seconds. So it doesn’t take long to get hot enough to do the job even in high melting temp plastics and comes with a nice variety of types of hot staples.
J. WhiteJanuary 4, 2025
Works well. Instructions OK, no tips or instructions for using the tool.
My need for this welder arises from working on multi-part 3D printing projects. In the past, I’ve employed “super glue” in conjunction with dowels or pins. However, this method is time-consuming and, depending on the project, not always effective. Upon witnessing this style of plastic welding in action while watching a video about fixing bumpers, I became eager to try it out for 3D printed projects, among other applications.Firstly, I must highlight that this is a rare situation where the product appears even better in person than it does in the listing. The plastic is more rugged and less toy-like than the product listing images might suggest. While I wouldn’t recommend drop testing it, I have no concerns about it breaking with the slightest impact either.The tool performs admirably. However, for those unfamiliar with the process, I would recommend practicing on some discarded materials and perhaps watching a video or two. The lack of useful information in the instructions is the single biggest drawback of the product. The instructions provide no guidance on the application of the tool. The only useful information in the entire instruction booklet is a notice about its thermal shutoff function. There is not a single mention of the best way to use the tool or even how to use it at all. While the operation is straightforward â there’s no need to explain how to insert a staple or pull the trigger to heat it up â it would be helpful to have some tips on the general process of welding plastic and specifically how best to weld plastic with this tool.For a test, I printed some ABS squares and performed a couple of welds. I attempted welding two squares side by side using the staple made for small cracks, heating the staple and then applying it to the plastic. Next, I tried the staple intended for larger cracks by welding two squares with a small gap between them. This time I held the staple against the plastic while heating and that seemed to work better than heating the staple before applying it to the plastic. Both welds were successful, however I didn’t conduct any sort of torture test. I think the staple welds will work well in applications where there is room for multiple staples. The tool provided to cut the excess from the staples worked well enough, but if I were using this frequently, I would probably seek a better option.Despite the weak documentation, the tool does all I need it to, and appears sturdier than similar products in its price range. I would recommend it others and would consider other products from this manufacturer based on my experience with this one.
JADJanuary 4, 2025
It works!
Never knew something like this existed before! But I had a broken outer plastic part on my vehicle that was actually split in two. I used this to put it back together and it worked and I was able to snap it back in place. I would never would have thought of something like this. Once I was finished you really couldnât tell where the piece was split at. I only wish I would have taken a before and after picture. But in all my excitement over it I just completely forgot. Highly recommend this tool, it is so handy and like the piece I fixed on my SUV, it saved me a lot of money. Even small replacement parts on autos today are getting ridiculous in price. So this tool pays for itself most likely in its first fix!!
E. OrchardJanuary 4, 2025
My first plastic welder
Item reviewed: WEP 960-V85 High Power Plastic Welder Kit with LED Lights with 200 Hot Staples and PliersDate reviewed: January 15, 2024I got another set of hot staples before I got the welder itself, so I did some watching of YT videos about how to use a plastic welder. This kit is complete – comes with the plastic welder, tons of staples, and a cutting tool to snip the ends off of the staples after you’re done welding.First thing’s first – don’t be dumb like me and do this inside. Esp in winter with no ventilation. The first thing I tried to weld was a plastic hair clip (just to test) and it caught fire (the clip, not the welder). Fumes and smoke everywhere. You’re melting plastic – it’s going to stink and put off gasses.My 2nd welding attempt was more successful, but again, I pushed too hard into the plastic and it went through. Obviously, thin plastics are going to be hard to weld.The instructions are not great (see pic). Since the staples remain hot until you release the trigger, you can’t wait for the plastic to cool and then release the trigger. I also wasn’t clear how to GET the staples into the welder. The two holes do not align perfectly with the staple ends, so you have to kind of push in one side of the staple to get it into the welder. In reading the instructions, “clamp a hot staple with the plier and install the staple into the copper tube”, I didn’t understand what to do. The staple should not be hot before you put it into the welder, and I have no idea how you’d use the included pliers to get the staple into the welder. I eventually just ended up using my hands to put the staples in. The tubes and the staples do not get hot until you press the trigger.The welder appears to be well-made and sturdy, but only time will tell. The LED on the welder is a nice touch. And these are TONS of staples for you to try out. There are about four different designs of staples, all your plastic welding needs should be met.Overall, I like it. The main issue for me is the poor instructions.
DavidJanuary 4, 2025
Pretty nice
Plastic welding is a bit of an art. I have a Harbor Freight air plastic welder, but never could do a decent job with it. I then resorted to using a very old Craftsmen soldering gun, which worked pretty good since it has a large tip that heats up red hot in seconds (they don’t make ’em like that any more). Now I have this WEP plastic welder and it is pretty easy to use and seems to do a good job, in my hands anyway. This stapler type is new to me and I think it is a great concept. Seems to make it easier and produces a stronger union between pieces of plastic. This will be what I use for most jobs now.
megan l hanleyJanuary 4, 2025
good welder kit
it’s easy to use. good price. and it’s sturdy and holds up nicely